Post by iconPost by zezo | 2009-09-13 | 17:30:21

Charts
polars

Some additional work needed like sail names etc.

commenticon 10 Comments
Post by iconPost by pcayrol | 2009-09-13 | 17:46:51
Oups wrong topic...
Post by iconPost by BennyLava | 2009-09-13 | 23:31:29
Cheers Cvetan, there's a 0,5 mile difference in boat speed. Charts says HS 11,6, game shows 11,1.
Post by iconPost by zezo | 2009-09-13 | 23:37:34
Quoting wind speeds and TWAs helps debugging a lot sometimes, ya know ;)
Post by iconPost by BennyLava | 2009-09-14 | 01:22:43
Sorry mate; TWA 131 degrees
Post by iconPost by BennyLava | 2009-09-14 | 01:24:26
Sorry mate; wind speed 17,8kt/18 degr. TWA 131 degr.
Post by iconPost by zezo | 2009-09-14 | 09:06:04
Thanks. Those crossover points again - for winds over 16kt HS is better than LS up to certain TWA.

It seems that the clipper (and transat) polars are too sparse for my current approach of using single static optimum sail equivalent.
Post by iconPost by pcayrol | 2009-09-15 | 00:18:38
what does it mean too sparse ?

I think I have no problem with PACOTOOL... Do you want any help ? CSV, interpolation methods ?
Post by iconPost by zezo | 2009-09-15 | 01:33:48
Everything is fine if you calculate the speed for given wind speed/TWA for all sails and choose the best one then. But the optimizer does 10 millions of those calculations in a single run and that would slow it down too much.
Post by iconPost by golf78 | 2009-09-14 | 09:17:34
Hi...
Maybe a small bug ? (but great tool anyhow)

The system indicates normal sails for my boat but I have pro sails (maybe because I only have normal sails on the IER)

Thanks,
Post by iconPost by zezo | 2009-09-14 | 09:31:58
Hi,

Sails are set manually from the right mouse context menu, the information about paid options is not used.
border
Topics list
Posts
border
5
border
border
Copyright 2009 by ZEZO.ORG. All Rights Reserved.